FDM gait analysis platform
Zebris analysis platform for posture, unwinding and balance, measuring the distribution of plantar pressures - FDM model
Consult our policies and code of ethics. to make sure you are eligible to make the purchase. If you have any questions, do not hesitate to ask for information from one of our expert advisors.
Dimensions
FDM SX: 55 cm (21,6") x 40 cm (15,7") x 2,1 cm (0,8")
FDM-S: 69 cm (27,1") x 40 cm (15,7") x 2,1 cm (0,8")
FDM 1.5: 158 cm (62,2") x 60,5 cm (23,8") x 2,1 cm (0,8")
FDM 2.0: 212,2 cm (83,5") x 60,5 cm (23,8") x 2,1 cm (0,8")
Resolution: 0,83 cm (0,33")
Number of pressure sensors
FDM-SX: 1920
FDM-S: 2560
FDM 1.5: 11264
FDM 2.0: 15360
Capture area
FDM-SX: 40 cm (15,7") X 33 cm (13")
FDM-S: 54 cm (21,2") X 33 cm (13")
FDM 1.5: 144 cm (56,6") X 56 cm (22")
FDM 2.0: 203 cm (80") X 56 cm (22")
Including software for data collection and analysis
Create values by offering a better view
Join us and move on to modern and effective treatment. Ask for a demonstration.
Analyse simple et précise de l'équilibre et de la marche
Le nouveau système de mesure Zebris FDM fonctionne en utilisant des capteurs de force capacitifs de très haute qualité qui sont
arrangés en forme de matrice composée de capteurs de 0,8 cm2. Chaque capteur produit sa propre courbe d'étalonnage. Les plateaux
de mesure permettent l’analyse de la distribution statique et dynamique des forces sous chaque pied lors d’un maintien debout
ou d’une marche. Avec toutes les options disponibles, le système FDM peut être étendu pour correspondre à votre demande.
En supplément à cette analyse de la marche, l’analyse des distributions de forces en statique permet la visualisation de la posture statique pendant un examen habituel. Lors de l’enregistrement, les répartitions gauche/droite et avant/arrière sont visualisées en diagramme de barres (%) mais aussi numériques (Newtons). Les mesures sont ensuite normalisées et ajoutées à l’analyse du centre de pression dans le rapport.
Les principaux paramètres spatio-temporels de la marche sont visibles dans le rapport d’évaluation, incluant :
la longueur du cycle, du pas, les phases de support/d’oscillation et de double support, la cadence et l’angulation du pied.
La variabilité de la vitesse de marche est calculée comme une mesure de l’instabilité posturale.
The zebris FDM system is fully equipped to analyze gait patterns of various individuals in order to quantify and diagnose abnormalities in gait cycles. Using high-quality plates with capacitive force sensors, the FDM system measures the weight distribution on each foot, making the appearance of gait compensations, overpronations and supinations easily discernible to the operator.
While the system itself is controlled by computer (via USB), the measurements of the FDM system are conveniently analyzed with the supplied WinFDM software, which can visually display the subject's walking patterns, as well as provide a detailed reading of the subject. gait cycle, as well as static and dynamic force distributions, all of which can be printed instantly.
A range of different platform sizes are available to allow for different measurement configurations.
For clinical applications
In a clinical setting, the FDM system can be used to easily identify a range of gait compensations, by analyzing dynamic force distribution readings from WinFDM software. Accompanied by the optional video module, the walk can also be played back to the operator and the patient concerned, in slow motion if necessary. This information can then be used to help form the basis of intervention strategies, which can then be used for patient rehabilitation. With this application in mind, the FDM system is also fully compatible with patients using walking aids.
For research applications
In a research context, the FDM system can be used to compare and contrast a range of gaits in order to analyze different experimental conditions compared to a control. Up to three measurements can be directly compared to each other using the WinFDM software. The measurement cycle can also be repeated up to four times to obtain the average of the results. The measurement sequences can be viewed using the “Viewer” of the supplied software, and the “Report” function creates instant printable feedback on the conditions tested.
The FDM plantar pressure distribution measurement system
For years, zebris FDM has successfully supported doctors and therapists in the diagnosis of postural deformities as well as podiatrists in the supply of insoles. The proven zebris FDM pressure distribution measuring system captures static and dynamic pressure distribution while standing and walking quickly and easily.
The zebris FDM system analyzes stationary and dynamic gait patterns using sophisticated high-quality plates and accompanying easy-to-use analysis software. Ideal for use in clinical settings as a diagnostic tool and as a biometric tool in research.
Superior image quality
The new Zebris FDM measuring system works by using very high quality capacitive force sensors which are arranged in a matrix shape composed of 0.8 cm2 (0.12 ") sensors. Each sensor produces its own calibration curve. The measuring plates allow the analysis of the static and dynamic distribution of the forces under each foot when standing or walking.
Clinic and research
The zebris FDM system is ideal for clinical and research environments because the 11,000 sensors provide a complete view of the distribution of static and dynamic force.
Versatility
A range of different platform sizes are available to allow for different measurement configurations. A range of accessories are also available to meet analytical needs, including a telemetry EMG (to record joint angles), and an optional video module.
